GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)

GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)
GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)GPS HAT for Raspberry Pi 4 / 3 / Pi 2 / A+/ B+ (By Adafruit)
รหัสสินค้า AS00127
หมวดหมู่ GPS / GPS Shield
ราคา 2,240.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
  • DESCRIPTION

    It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2

    Here's the low-down on the GPS module:

    • -165 dBm sensitivity, 10 Hz updates, 66 channels
    • Only 20mA current draw
    • Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!
    • PPS output on fix, by default connected to pin #4
    • Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view
    • Fix status LED blinks to let you know when the GPS has determined the current coordinates

    We spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more.

     

    Tutorial: Click Here!!

     

    Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module. So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT

    Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header.

    To make air-shipping eaiser, this HAT does not come with a 12mm coin battery! A CR1220 will let you use the real-time-clock capability of the GPS HAT, you can pick one up locally or order one from us.

     

     

     

     

  • TECHNICAL DETAILS

    • LEARN

      Adafruit Ultimate GPS HAT for Raspberry Pi
      Find yourself, and your Pi, using a GPS HAT

    วิธีการชำระเงิน

    ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

    กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

     

    ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

    https://www.arduitronics.com/informpayment

     

    บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
    ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
    ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
    ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

    เพิ่มเพื่อน

    @rfm0967y

    ติดต่อสอบถาม

    เพิ่มเพื่อน

    CATEGORY

    Sensors / Modules [1703]

    CONTACT US

    มือถือ 0887823467 แฟกซ์ 02-0153201

    Join เป็นสมาชิกร้านค้า

    ร้านArduitronics
    ร้านArduitronics
    /www.arduitronics.com/
    Join เป็นสมาชิกร้าน
    2140
    สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

    STATISTICS

    หน้าที่เข้าชม15,419,713 ครั้ง
    ผู้ชมทั้งหมด5,922,792 ครั้ง
    เปิดร้าน21 พ.ค. 2556
    ร้านค้าอัพเดท4 ต.ค. 2568

    MEMBER

    พูดคุย-สอบถาม