Time of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX

Time of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX
Time of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NXTime of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NXTime of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NXTime of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NXTime of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NXTime of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NXTime of Flight Camera for Raspberry Pi and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX
รหัสสินค้า BR00324
หมวดหมู่ Camera / Vision
ราคา 3,185.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

INTRODUCTION

A Time of Flight camera module featuring a MIPI-CSI 2 connection and offering up to 4-meter measuring range with sub-2cm precision, designed and optimized exclusively for Raspberry Pi & Nvidia Jetson boards.


Quick Look:

  • Real-time point cloud and depth map.
  • Resolution: 240x180@30fps on RPI4/CM4
  • Up to 4M measuring distance
  • Onboard 940nm laser for both indoor & outdoor uses, no external light source needed.
  • V4L2-based video kernel device
  • C/C++/Python SDK for userland depth map output and example source code
  • ROS ready.
  • 38 x 38mm board size

SPECIFICATION

 
Number of Effective Pixels 240×180
Image Size 1/6″
Max. Frame Rate (Sensor) 120fps
Max. Depth Frame Rate (Raspberry Pi) 30fps, 4-phase
Max. Depth Frame Rate (Nvidia Jetson**) 30fps, 4-phase
Raspberry Pi OS Bookworm/Bullseye (32-bit/64-bit) 01/28/22 or later releases
TDP 3.5W Power supply for Pi should be at least 5V/4A
Supported Platforms*** Pi 5/4/2/3/CM3/4B/Zero W/Zero 2 W/CM4/Nvidia Jetson Board
Modulation Frequency 75MHz/37.5MHz
Viewing Angle 70° Diagonal
Measurement Distance Far Mode: 4m Near Mode: 2m
Light Source 940nm VCSEL illuminator
Board Size 38mm x 38mm
Interface MIPI (2-Lane)
Output Formats 4-phases RAW Frame, Depth Frame, Grayscale Amplitude Frame

Documents

SHIPPING LIST

  • 1 x Arducam ToF Camera Module
  • 1 x FPC 15cm 15pin Cable
  • 1 x 2-pin Dupunt Cable 
  • 1 x15cm 15-22pin FPC Cable

Note:

* To use the camera on Pi Zero and 2 W, you need this.

** Tested on Jetson Nano/Orin NX/Orin Nano/Xavier NX

*** To utilize it with Raspberry Pi 5, updating the firmware is necessary. Please refer to: Firmware Update


FAQ

Is it compatible with all Raspberry Pi models?
Yes, it can work with most Pis. However, with early models, there may be performance drops.

Do I need external light sources?
No, the camera has an onboard laser. (Non-intrusive, safe for the human eye.)

What’s the maximum operating range?
Far Mode: 4m Near Mode: 2m

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1711]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2156
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,445,431 ครั้ง
ผู้ชมทั้งหมด5,948,509 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท22 ต.ค. 2568

MEMBER

พูดคุย-สอบถาม