Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm (แท้ Adafruit, USA)

Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm (แท้ Adafruit, USA)
Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm (แท้ Adafruit, USA)Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm (แท้ Adafruit, USA)Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm (แท้ Adafruit, USA)Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm (แท้ Adafruit, USA)Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm (แท้ Adafruit, USA)
รหัสสินค้า SG40079
หมวดหมู่ Infrared (IR)
ราคา 325.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
ดูรายละเอียดการใช้งานและตัวอย่างโค๊ด Arduino
Description
While designing our IR decoding breakout we noticed the TSSP series of chips from Vishay, these are simpler than more 'remote control' receivers in that they don't do any filtering on the codes received: you really just get the demodulated-from-38KHz-signal output.

According to Vishay, they're designed for "Reflective Sensing, Light Barriers, and Fast Proximity Applications". These sensors could be interesting for use when you want a less-'intelligent' IR decoder, or for proximity projects where you don't want to go all-out for a VCNL I2C sensor. These are good for creating break-beams where the IR light is modulated rather than just solid on, because you won't be affected by other IR signals or ambient light changes.

This board will work nicely for a variety of IR detecting projects, and with mounting holes and a cable, a lot easier to mount in enclosures and on devices. Using a 2mm pitch STEMMA JST PH cable with headers or alligator clips on the end, you can easily wire this board without any soldering.

Note that this board is specifically for proximity sensing or break-beam projects, while it can receive 38KHz IR remote control signals - there isn't a filter system so you'll get a lot of spurious signals.

Each STEMMA board is a fully assembled and tested PCB but no cable. No soldering is required to use it, but you will need to pick up a 2mm pitch, 3-pin STEMMA JST PH cable. Alternatively, if you do want to solder, there's a 0.1" spaced header for power/ground/signal.

Technical Details

Product Dimensions: 25.4mm x 17.8mm x 7.2mm / 1.0" x 0.7" x 0.3"

Product Weight: 1.9g / 0.1oz

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1695]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2118
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,375,197 ครั้ง
ผู้ชมทั้งหมด5,878,275 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท5 ก.ย. 2568

MEMBER

พูดคุย-สอบถาม