รหัสสินค้า | SG00107 |
หมวดหมู่ | Gas Sensors แก๊สเซ็นเซอร์ |
ราคา | 50.00 บาท |
สถานะสินค้า | พร้อมส่ง |
จำนวน | ชิ้น |
MQ-5 semiconductor combustible gas sensor
เซนเซอร์วัดความเข้มของก๊าซ LPG โดยแสดงค่าเป็น Analog 0-5 V
Specification
http://www.seeedstudio.com/depot/datasheet/MQ-5.pdf
MQ-5 gas-sensitive material is used for gas sensors in clean air low conductivity tin oxide (SnO 2 ) . When there is the environment in the combustible gas sensor, conductivity sensor with increasing concentrations of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal.
MQ-5 gas sensor of high butane, propane, methane sensitivity, methane and propane can be better taken into account. This sensor can detect a variety of flammable gases, especially natural gas, is a low-cost sensors for a variety of applications.
Features
* In a wide range of concentration of combustible gases with high sensitivity
* butane, propane, methane, higher sensitivity
* long life, low cost,
simple drive circuit can be *
Applications
* household gas leak alarm
* Industrial combustible gas alarm
* portable gas detector
Technical indicators
Product Type |
MQ-5 |
||
Product Type |
Semiconductor gas sensor |
||
Standard package |
Bakelite (black bakelite) |
||
Detection of gas |
Liquefied petroleum gas, methane, coal gas, LPG |
||
Detectable concentration |
300-10000ppm ( methane, propane, butane, hydrogen) |
||
Standard circuit conditions |
Circuit voltage |
V c |
≤ 24V DC |
Heating voltage |
V H |
5.0V ± 0.2V ACorDC |
|
Load Resistance |
R L |
Adjustable |
|
Under standard test conditions sensing Characteristics |
Heating resistor |
R H |
31 ± Omega 3 Omega (room temperature) |
Heating power |
P H |
≤ 900mW |
|
Sensitive surface resistivity |
R s |
2K Omega 20K Omega (in 2000 ppm C 3 H 8 ) |
|
Sensitivity |
S |
Rs (in air) / Rs (1000ppm isobutane ) ≥5 |
|
Concentration slope |
α |
≤ 0.6 (R 1000 ppm / R500 ppm H 2 ) |
|
Standard Test Conditions |
Temperature, humidity, |
20 ° C ± 2 ° C; 65% ± 5% RH |
|
Standard test circuit |
Vc: 5.0V ± 0.1V ; V H : 5.0V ± 0.1V |
||
Warm-up time |
Not less than 48 hours |
ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB
กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ
ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ
https://www.arduitronics.com/informpayment
หน้าที่เข้าชม | 15,420,829 ครั้ง |
ผู้ชมทั้งหมด | 5,923,907 ครั้ง |
เปิดร้าน | 21 พ.ค. 2556 |
ร้านค้าอัพเดท | 5 ต.ค. 2568 |