RS485 Wind Speed Transmitter (0~32.4m/s) - แท้จาก DFRobot

This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The shell and wind cups are made of aluminum alloy material and use special mold precision die casting process, featuring small dimension tolerance and high surface accuracy. The sensor internal circuit is protected, which makes the sensor have the properties of high strength, weather resistance, anti-corrosion, and waterproof. The cable connector adopts corrosion-resistant military plug that ensures the long service life of the product.

A low-inertia anemometer is used to sense the wind speed. When the wind blows the wind cup to rotate, it drives the axle magnet to rotate through the shaft, then the accurate wind speed information can be obtained after calculation. This high-cost performance sensor can be widely used in meteorology, ocean, environment, airports, ports, laboratories, industry, agriculture and transportation.

FEATURES 

• Compact size, easy to install, portable
• The surface of aluminum alloy material is sprayed with plastic, anti-corrosion and high-temperature resistance
• Quality bearings, low resistance, low start-up wind speed
• High measurement accuracy, wide range, good stability
• Reasonable structure design, good appearance quality
• Long signal transmission distance, strong anti-interference ability

SPECIFICATION 

• Measuring Range: 0~32.4m/s
• Start-Up Wind Speed: 0.2-0.4m/s
• Accuracy: ±0.3m/s
• Lead Length: 2.5m/98.43”
• Power Voltage: 7-24V
• Communication Protocol: RS485 interface Modbus protocol

 DOCUMENTS 

• Product wiki

SHIPPING LIST 

• RS485 Wind Speed Transmitter x1
• 2.5m Wire x1

Tutorial

1. Wire Color Description

2. Modbus Protocol

• The default communication parameters are: baud rate 9600bps, one start bit, 8 data bits, no parity, and one stop bit.

• Modbus Register

• Modbus Register Parameter Instruction

Meaning: wind direction measuring value Example: If the returned value is 00 25 (hexadecimal, original code) = 0x0025 = 37, then the wind speed measuring value is 37/10=3.7m/s

• Example

1. Read register 0x0000, that is the measuring value of the wind direction Host query frame (hexadecimal): 02 03 02 00 00 00 01 84 39 (8byt)

Slave response frame (hexadecimal): 02 03 02 00 25 3D 9F (7byt)

The wind speed value is (hexadecimal, original code) 00 25 = 0x0025 = 37, then the wind speed measuring value is 37/10 = 3.7m/s

2. Modify register 0x1000, which is the Modbus slave address (ADDRESS) Modify the Modbus slave address to 03 Host query frame (hexadecimal): 00 10 10 00 00 01 02 00 03 FA 00 (11byt)

Slave response frame (hexadecimal): 00 10 10 00 00 01 04 D8 (7byt), that is, the modification is successful. After setting, you need to re-power on and restart the transmitter to make this address take effect.

Using in Raspberry Pi

1. Connection

Here USB to RS485 Module is used.

2. Install libraries and download routines

Type the following commands in the terminal one by one

cd /tmp
wget https://project-downloads.drogon.net/wiringpi-latest.deb //Download wiringpi library
sudo dpkg -i wiringpi-latest.deb //Install wiringpi library
cd ..... //Enter the content you want to save file in
git clone https://github.com/DFRobotdl/RS485_Wind_Speed_Transmitter.git //Download program in github
cd RS485_Wind_Speed_Transmitter/

3. API Function List

 /**
@brief initialize serial port
@param device Address of serial port，In Linux, it is the directory where the device is located.
@return Return 1 for initialization failure, and return 0 for initialization success
*/
unsigned char Init(char *device);

/**
@brief Modify address
@param Address1 For the current address, you can set any address with 0 address
@param Address2 The modified address.
@return A return value of 1 indicates success, and a return value of 0 indicates failure
*/
unsigned char ModifyAddress(unsigned char Address1, unsigned char Address2);

/**
@brief Read wind speed
@param Address The address where you want to read the data
@return The return value ≥0 indicates successful reading, the return value is wind speed, and the return value -1 indicates failed reading
*/
float readWindSpeed(unsigned char Address);

4. Check the device

Type this in the terminal:

sudo ls -l /dev

Find out the device you just connected in.

5. Open the previously downloaded min.c file, change the device port in the program to the actual one and save it

6. Use the terminal to open the folder where the program is located, compile and run

gcc -Wall -lwiringPi -o Wind_Speed *.c
sudo ./Wind_Speed

You can see the accurate wind speed information