TB6600 Economic Version
TB6600 Microstep Driver Peak 4A, 9-42VDC (IC TB67S109AFTG) 2-Phase
PWM chopper type bipolar stepper motor driver IC
1. 9V-42V DC power supply
2. H bridge bipolar constant phase flow drive
3. the maximum 4.0A of the eight kinds of output current
4. the largest 32 subdivision of the 6 models are optional
5. input signal high speed photoelectric isolation
6. common-anodestandard single pulse interface
7. offline to maintain the function
8. semi closed enclosure can be adapted to a more stringent environment
9. to provide energy-saving semi-automatic current lock function
10. built-in temperature protection and over current protection
* Can control 2 phase stepper motor forward and reverse rotation
* With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
* Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
Features
- single chip bipolar sine microstep stepper motor driver
- the new BiCD 0.13 nm process
- up to 42V
- resistance (a +) = 0.4.
- the forward and reverse rotation control
- 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32)
- output current: IOUT = 4.0A (peak, in 100ms)
- rated output: IOUT = 3.5 A
- package: HZIP25 - 1.00F
- input port internal pull-down resistor: 100 K.
- alarm output pin current:Ialert = 1mA
- monitoring output pin (MO): Imo= 1mA
- with reset and enable pin
- with standby function.
- Break through the traditional, single power supply
- built in overheating protection (TSD) circuit
- Undervoltage protection, built-in (UVLO) circuit
- built-in overcurrent detection (ISD), circuit
ตัวอย่างการต่อกับ Arduino UNO
ดูตัวอย่าง arduino code ได้ที่ Click