Garmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic) - แท้จาก Garmin™ โดย SparkFun

Garmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic) - แท้จาก Garmin™ โดย SparkFun
Garmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic) - แท้จาก Garmin™ โดย SparkFunGarmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic) - แท้จาก Garmin™ โดย SparkFunGarmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic) - แท้จาก Garmin™ โดย SparkFunGarmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic) - แท้จาก Garmin™ โดย SparkFun
รหัสสินค้า AS40158
หมวดหมู่ LIDAR / เซ็นเซอร์วัดระยะทาง / ความเร็ว Distance / Speed
ราคา 3,985.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

บริษัท Garmin ได้ออกแบบ Lidar Lite V4 ให้เป็นเซ็นเซอร์วัดระยะด้วยแสง (optical distance sensor) ขนาดเล็กที่มีประสิทธิภาพสูงและใช้พลังงานต่ำ เหมาะสำหรับงานประเภท โดรน หุ่นยนต์ IoT หรือ อากาศยานไร้คนขับ ที่มีพื้นที่จำกัดและแบกรับน้ำหนักได้ไม่มาก โดย Lidar Lite V4 มีระยะวัดได้ตั้งแต่ 5cm ถึง 10m ที่ 1cm resolution (update rate > 200Hz) ใช้กระแสเพียงแค่ 85mA ในช่วง acqisition และ 2mA ในช่ง Idle (ดู datasheet) ทาง Garmin ได้เตรียม arduino library และ ตัวอย่าง arduino code ไว้ให้พร้อมใช้ Click

ดูรายละเอียดการใช้งานได้ที่ Click



Description

The LIDAR-Lite v4 Qwiic from GARMIN is a high-performance, wireless optical distance measurement sensor that doesn't require any soldering to get started. This is the ideal solution for drone, robot, IoT, or unmanned vehicle operations when space is tight and power is limited. This sensor has up to a 10 meter range, 1cm resolution, and requires 85mA during data acquisition. The user can read and write to the LIDAR-Lite v4 using the I2C protocol; this is where the addition of the SparkFun Qwiic system really shines. The LIDAR sensor requires 5V to operate but runs on 3V3 logic. With a 5V boost circuit and an easy-to-use Qwiic connector you can power the sensor and get distance measurements over Qwiic all with a single piece of hardware.

The LIDAR sensor works by sending out an infrared beam and measuring the time it takes to be reflected back. The LIDAR-Lite v4 utilizes LEDs rather than a laser for this iteration; therefore, it is inherently eye-safe under normal usage. The built-in nRF52840 microcontroller runs a pre-loaded "out of the box" stock application to calculate the distance between itself and something in front of it. The equipped nRF52840 also allows developers to create custom applications to expand on the "out of the box" functionality or connect to an external micro-controller running a custom user application.

The SparkFun LIDAR Lite v4 Arduino library makes getting data as easy as a call to the getDistance() function. The library also supports changing the I2C address of each LIDAR and provides an easy example of how to do so. Its low power-consumption and I2C address configuration means you can daisy-chain up to 10 of these sensors on one microcontroller platform.
Note: The I2C address of the Qwiic LIDAR-Lite v4 is 0x62 and is software-configurable to any address. A multiplexer/Mux is required to communicate to multiple Qwiic LIDAR-Lite v4 sensors on a single bus. If you need to use more than one Qwiic LIDAR-Lite v4 sensor consider using the Qwiic Mux Breakout.

Features:
  • Resolution: 1cm
  • Measurement repeatability:
    • As measured indoors to a 90% reflective target
    • 1cm is equivalent to one standard deviation
    • Using “high accuracy” mode, with averaging:
      • +/- 1cm to 2 meters
      • +/- 2cm to 4 meters
      • +/- 5cm to 10 meters
  • Range: 5 cm to 10 meters (as measured from back of unit)
  • Update rate:
    • I2C = >200Hz typical
    • ANT® = up to 200Hz to a 90% target indoors at 2m in normal operating mode
  • Interface: I2C or ANT; user configurable for SPI using the Nordic SDK
  • Power (operating voltage): 3.3VDC
  • Operating temperature: -20 to 60° C
  • LED wavelength: 940nm
  • Beam divergence: 4.77°
  • Optical aperture: 14.9mm
  • Unit size (LxWxH): 2.8in x 1.0in x 0.9in
Documents:

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1711]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2156
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,442,606 ครั้ง
ผู้ชมทั้งหมด5,945,684 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท21 ต.ค. 2568

MEMBER

พูดคุย-สอบถาม