โมดูลรีเลย์สวิตช์กดติดกดดับ ใช้ไฟเลี้ยง 12V
- เมื่อกดที่สวิตช์รีเลย์จะทำงาน
- กดอีกครั้งรีเลย์จะเลิกทำงาน
สามารถใช้ควบคุมเปิด/ปิดอุปกรณ์ไฟฟ้า ด้วยสวิตช์ปุ่มเดียวมีช่องสำหรับต่อสวิตช์ที่อยู่ในบอร์ดเพิ่ม เพื่อให้กดได้สะดวก การต่อวงจรดังรูปนี้
- power supply 12V
- Press the button on the board or the external button to let the relay module pull in or off. Press the pull button and then press the button to trigger the low level. The relay is off when the power is turned back on.
- The maximum current withstand of the secondary output of the relay is 10A, which means that the maximum working current of the controlled circuit or equipment cannot be greater than 10A, and it is connected to the normally open or normally closed end according to its own needs.
- The welding position of the external suction and light indicator is reserved, and the welding indicator light is also welded on the board.
- module size: length x width x height = 52.8mm x 32mm x 18mm
One-button two-state relay module, the positive and negative power supply will burn off, no power supply reverse protection The low level control is that the signal line and the ground touch are a trigger signal.