บอร์ดขับมอเตอร์ 2 ตัว กำลังขับสูงสุด 2.5A Mini Dual Channel DC Motor Driver PWM Speed Control L298N มาพร้อมสายไฟบอร์ดขับมอเตอร์ ปรับความเร็วได้ สำหรับควบคุมมอเตอร์ 2 ตัว กำลังขับต่อเนื่อง 1.5A สูงสุดที่ 2.5A มีวงป้องกันโหลดและความร้อนเกิน ประหยัดพลังงาน ความร้อนขณะทำงานต่ำ สเปคบอร์ดขับมอเตอร์ Super L298N
- บอร์ดขับมอเตอร์แบบ H-bridge สองช่อง สามารถขับเคลื่อนมอเตอร์ DC ได้ 2 ตัว
- ใช้ไฟเลี้ยง 2-10V
- ขับมอเตอร์แรงดันไฟฟ้า 1.8-7V;
- ใช้กระแสไฟขณะทำงาน 2.5A ขณะสแตนบายน้อยกว่า 0.1uA
- มีวงจรป้องกันอินพุตช็อต
- วงจรป้องกันการโอเวอร์ฮีท (TSD) Hysteresis Effect ป้องกันมอเตอร์
- ขนาดสินค้า: 31x32x5 มม.ขนาดเล็กพิเศษ
- เส้นผ่านศูนย์กลางของรูยึด: 2 มม.
- น้ำหนัก: มาตรฐาน 5g สูง 11g
2.5A dual motor drive module positive and negative PWM speed regulation double H bridge stepper motor Super L298N
Description: 2.5A Power Enhanced motor drive module with high version (including silicone wire, pin, terminal), and choose a standard version, the supply voltage 2V ~ 10V , the DC motor can drive two or . 1 th 4 The line 2- phase stepping motor can realize the functions of forward and reverse rotation and speed regulation, with thermal protection and automatic recovery.
- Factory direct sales, super L298N , can be replaced.
- This make-up product for sale, each large = . 1 0 platelets.
Product highlights :
1. It adopts imported professional motor drive chip and built-in low-conduction internal resistance MOS switch tube. It has very low heat, no heat sink, small size and power saving. It is an ideal choice for battery power supply.
( L298N is a transistor switch inside, low efficiency, high heat, heat dissipation, bulky, L298N on the market is very easy to burn out, no original chip is used, this product can be replaced.)
2. Dual 2.5A*2, is an enhanced version of 1.5A motor drive, built-in overheat protection circuit, no need to worry about motor stalled burnout, automatic recovery after temperature drop. ( Currently, the smart car voltage and current in the market are within this range )
3. Small size, light weight, 0 standby current, high version and standard version are available.
Product parameters:
1. Two-way H-bridge motor drive, can drive two DC motors or one 4-wire two-phase stepper motor at the same time;
2. Module supply voltage 2V-10V;
3. Signal input voltage is 1.8-7V;
4. Single working current 2.5A, low standby current (less than 0.1uA);
5. Built-in anti-common state conduction circuit, when the input terminal is suspended, the motor will not malfunction;
6. Built-in overheat protection circuit (TSD) with hysteresis effect, no need to worry about motor stall;
7. Product size: 31*32*5mm (length, width and height), ultra-small size, suitable for assembly and vehicle;
8. Mounting hole diameter: 2 mm
9. Weight: standard 5g, high with 11g
Precautions:
1. The connection between the positive and negative terminals of the power supply will definitely cause damage to the circuit.
2. The output is short-circuited to the ground or short-circuited at the output, and the chip is thermally protected. However, if the voltage is close to or exceeds 10V and the peak current greatly exceeds 2.5A , the chip will burn out.