Gravity: Analog pH Sensor / Meter Pro Kit For Arduino (แท้จาก DFRobot)

Gravity: Analog pH Sensor / Meter Pro Kit For Arduino (แท้จาก DFRobot)
Gravity: Analog pH Sensor / Meter Pro Kit For Arduino (แท้จาก DFRobot)Gravity: Analog pH Sensor / Meter Pro Kit For Arduino (แท้จาก DFRobot)Gravity: Analog pH Sensor / Meter Pro Kit For Arduino (แท้จาก DFRobot)Gravity: Analog pH Sensor / Meter Pro Kit For Arduino (แท้จาก DFRobot)
รหัสสินค้า AS00311
หมวดหมู่ วัดสภาพแวดล้อมและแก๊ส Environmental / Gas
ราคา 2,885.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
ดูตัวอย่าง Code Arduino ได้ที่ Click

INTRODUCTION


This is a professional Arduino pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient , practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, then plug the PH2.0 interface into the analog input port of any Arduino controller. If programmed , you will get the pH value easily.You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series. This industrial pH electrode is made of sensitive glass membrane with low impedance. It can be used in a variety of PH measurements with fast response and excellent thermal stability. It has good reproducibility, is difficult to hydrolysis, and can eliminate basic alkali error. In 0pH to 14pH range, the output voltage is linear.The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance. The ring PTFE membrane is not easy to be clogged, so the electrode is suitable for long-term online detection. You can find its spare probe here: Industrial pH Probe. Note: After you received your package! You may found some white particles on the protection foam which is the KCl crystallization from the cap. Please don't worry about the crystallization in the packing box, that's normal. Actually, since the transportation restriction on liquid, we have poured out the KCL3N solution in the cap, the slight crystallization in the packing box should be leaked since the remnant. Anyway, once you received the probe, you should store it in KCL3N solution, you can not leave it in dry circumstance.

APPLICATIONS
Water Quality
Surveillance Aquaculture

SPECIFICATION
Module Power : 5.00V
Module Size : 43mmx32mm (1.70"x1.26")
Measuring Range :0-14PH Measuring
Temperature :0-60 ℃
Accuracy : ± 0.1pH (25 ℃)
Response Time : ≤ 1min Industry pH Electrode with BNC Connector PH2.0 Interface ( 3 foot patch ) Gain Adjustment Potentiometer Power Indicator LED

DOCUMENTS

SHIPPING LIST

  • Industry pH electrode (BNC connector) x1
  • pH sensor circuit board x1
  • Analog cable x1

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1711]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2156
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,443,117 ครั้ง
ผู้ชมทั้งหมด5,946,195 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท21 ต.ค. 2568

MEMBER

พูดคุย-สอบถาม