[PlanTower] Laser Dust Formaldehyde Sensor PM2.5 PMS5003ST (with Free Cable) เซ็นเซอร์ตรวจจับฝุ่น สารฟอร์มาลดีไฮด์ PM2.5 แบบเลเซอร์ PMS5003ST (แถมสายเคเบิล)

[PlanTower] Laser Dust Formaldehyde Sensor PM2.5 PMS5003ST (with Free Cable) เซ็นเซอร์ตรวจจับฝุ่น สารฟอร์มาลดีไฮด์ PM2.5 แบบเลเซอร์ PMS5003ST (แถมสายเคเบิล)
[PlanTower] Laser Dust Formaldehyde Sensor PM2.5 PMS5003ST (with Free Cable) เซ็นเซอร์ตรวจจับฝุ่น สารฟอร์มาลดีไฮด์ PM2.5 แบบเลเซอร์ PMS5003ST (แถมสายเคเบิล)[PlanTower] Laser Dust Formaldehyde Sensor PM2.5 PMS5003ST (with Free Cable) เซ็นเซอร์ตรวจจับฝุ่น สารฟอร์มาลดีไฮด์ PM2.5 แบบเลเซอร์ PMS5003ST (แถมสายเคเบิล)[PlanTower] Laser Dust Formaldehyde Sensor PM2.5 PMS5003ST (with Free Cable) เซ็นเซอร์ตรวจจับฝุ่น สารฟอร์มาลดีไฮด์ PM2.5 แบบเลเซอร์ PMS5003ST (แถมสายเคเบิล)[PlanTower] Laser Dust Formaldehyde Sensor PM2.5 PMS5003ST (with Free Cable) เซ็นเซอร์ตรวจจับฝุ่น สารฟอร์มาลดีไฮด์ PM2.5 แบบเลเซอร์ PMS5003ST (แถมสายเคเบิล)
รหัสสินค้า SG00376
หมวดหมู่ วัดสภาพแวดล้อมและแก๊ส Environmental / Gas
ราคา 1,385.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

ดูตัวอย่างการใช้งาน PMS5003ST ได้ที่ Click โดยแนะนำให้ใช้งานกับ pin adapter SG00343

คำอธิบาย
PMS5003ST คือเซ็นเซอร์ตรวจวัดฝุ่นที่สามารถวัดค่า PM1.0 PM2.5 และ PM10 โดยเซ็นเซอร์วัดค่าอนุภาคของฝุ่นที่มีขนาดเล็กถึง 0.3 ไมโครเมตร อีกทั้งยังสามารถวัดค่าฟอร์มาลดีไฮด์ อุณหภูมิและความชื้น ตัวเซ็นเซอร์จะใช้แสงเลเซอร์ในการตรวจวัดฝุ่นในอากาศทำให้มีความแม่นยำในการตรวจวัดค่าฝุ่น เซ็นเซอร์ทำงานที่แรงดัน 5V โดยจะมี Output ออกมาเป็น UART(TX/RX) ที่แรงดัน 3.3V

Technical Details: 

Operating Voltage: 5.0VDC
Active Current: 100 mA
Standby Current: ≤200 uA
Interface Level: L <0.8V@3.3V; H> 2.7V@3.3V
Particle Range of measurement: 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm
Particle Counting Efficiency: 50%@0.3μm 98%@>=0.5μm
Particle Effective Range (PM2.5 standard): 0 ~ 500μg/m
Particle Maximum Range (PM2.5 standard)*: >0 ~ 2000ug / m³
Particle Resolution: 1ug / m³
Particle Maximum Consistency Error (PM2.5 standard data)*: ±10%@100~500μg/m³ ±10μg/m³@0~100μg/m³
Particle Standard Volume: 0.1 L
Formaldehyde Effective Range: 0 ~ 1 mg / m³
Formaldehyde Maximum Range: 0 ~ 2 mg / m³
Formaldehyde Resolution: 0.001
Formaldehyde Maximum Consistency Error: <± 5%
Temperature Maximum Range: -10~50 ℃
Temperature Resolution: 0.1 ℃
Temperature Maximum Error: ± 0.5 ℃
Humidity Maximum Range: 0 ~ 99%
Humidity Resolution: 0.1%
Humidity Maximum Error: ± 2%
Weight: 50g
Default Baud rate: 9600bps
Total Response time: ≤ 10s
Operating Temperature Range: -10 ~ +60 ℃
Working Humidity Range: 0~99%
Dimension: 50 * 38 * 21 mm/1.97*1.50*0.83 inches

PMS5003ST series is a can monitor the concentration of air in the air, formaldehyde concentration and temperature and humidity of the three in one sensor. The monitoring of particulate matter concentration based on the principle of laser scattering, continuous collection and calculation of the unit volume of air in different particle size of the number of suspended particles, that is, particle concentration distribution, and then converted into a mass concentration. Formaldehyde concentration monitoring based on electrochemical principles, with a high degree of precision, high stability characteristics. The sensor is also equipped with Swiss temperature and humidity detection chip. Particle concentration values, formaldehyde concentration values and temperature, humidity combined to the general form of digital interface output. The sensor can be embedded in a variety of air quality monitoring and improvement related equipment, to provide timely and accurate environmental parameters.

The sensor uses the principle of laser scattering. It means that the laser light on the particles in the air and making the scattering, while collecting scattered light at a particular angle , resulting in scattered light intensity with time curve. Furthermore, the microprocessor uses the algorithm based on Mie (MIE) to obtain the equivalent particle size of the particles and the number of particles with different particle diameters per unit volume.

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1695]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2118
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,375,197 ครั้ง
ผู้ชมทั้งหมด5,878,275 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท5 ก.ย. 2568

MEMBER

พูดคุย-สอบถาม