Dual Step Motor Shield V1.1

Dual Step Motor Shield V1.1
Dual Step Motor Shield V1.1Dual Step Motor Shield V1.1Dual Step Motor Shield V1.1Dual Step Motor Shield V1.1Dual Step Motor Shield V1.1
รหัสสินค้า AG00335
หมวดหมู่ Motor Drive / Shield
ราคา 280.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Dual Step Motor Shield V1.1 เป็น Shield สำหรับ Arduino ใช้ควบคุม Stepper Motor ได้พร้อมกัน 2 ตัว

Introduction:


Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine. It uses the same stepper motor driver chip as EasyDriver, so you can use it as 2 EasyDriver modules on board. And there are all pins breakout as 3PIN electronic brick/ sensor brick interface.

Specification:

  • A3967 microstepping driver
  • Board Size:  69mm x 61mm
  • Power Supply : 4.75 - 30 V
  • Operation Level :  Digital 3.3V, Digital 5V

Supported Info:

สินค้าประกอบด้วย

  • Dual Step Motor Shield V1.1 x 1 pcs

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1703]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2140
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,417,779 ครั้ง
ผู้ชมทั้งหมด5,920,859 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท3 ต.ค. 2568

MEMBER

พูดคุย-สอบถาม