Soil Moisture Sensor for Arduino (Catalex)

Soil Moisture Sensor for Arduino (Catalex)
Soil Moisture Sensor for Arduino (Catalex)Soil Moisture Sensor for Arduino (Catalex)Soil Moisture Sensor for Arduino (Catalex)Soil Moisture Sensor for Arduino (Catalex)
รหัสสินค้า SG00014
หมวดหมู่ วัดสภาพแวดล้อมและแก๊ส Environmental / Gas
ราคา 90.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

Soil Moisture Sensor (รุ่นใหม่)

   ใช้งานเพื่อการวัดความชื่นในดิน โดยการวัดค่าความต้านทานระหว่างอิเล็กโทรดที่ชุบโลหะอย่างดีเพื่อป้องกันการเกิดออกซิเดชั่น เพิ่มอายุการใช้งานและลดการสึกหรอเนื่องจากความชื้น  เหมาะสมกับการใช้งานเพื่อการทำระบบรดน้ำอัตโนมัติ  เป็นโมดูลเดียวเบ็ดเสร็จในตัว ไม่ต้องมีส่วนวงจรแยกเหมือนรุ่นเก่า  เหมาะสมกับการใช้งานร่วมกับ Extension Module Shield

 

  The new soil moisture sensor uses Immersion Gold which protects the nickel from oxidation. Electroless nickel immersion gold (ENIG)  has several advantages over more conventional (and cheaper) surface platings such as HASL (solder), including excellent surface planarity (particularly helpful for PCB's with large BGA packages), good oxidation resistance, and usability for untreated contact surfaces such as membrane switches and contact points.

 
A soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a must have tool for a connected garden!
 
This sensor uses the two probes to pass current through the soil, and then it reads that resistance to get the moisture level. More water makes the soil conduct electricity more easily (less resistance), while dry soil conducts electricity poorly (more resistance).
 
It will be helpful to remind you to water your indoor plants or to monitor the soil moisture in your garden. The IO Expansion Shield is the perfect shield to connect this senor to Arduino.

 

Specification

Project

Min

Typical values

Max

Unit

Supply Voltage

3.3

5

5.5

VDC

Current (@ 5V)

-

30

50

mA

Size

42X24X7.2

mm

Weight

4

g

 

 

ตัวอย่างการใช้งาน

บทความเรื่อง การใช้งาน Moisture Sensor on Arduino and Android over Bluetooth ของร้าน Arduitronics ครับ

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1695]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2118
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,375,394 ครั้ง
ผู้ชมทั้งหมด5,878,472 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท5 ก.ย. 2568

MEMBER

พูดคุย-สอบถาม