รหัสสินค้า | SG00048 |
หมวดหมู่ | ตรวจวัดแรงกด และ วัดน้ำหนัก Force / Weight Sensor |
ราคา | 35.00 บาท |
สถานะสินค้า | พร้อมส่ง |
จำนวน | ชิ้น |
Touch Sensor
โมดูลใช้สำหรับรับค่าคำสั่งโดยการสำผัสจากผู้ใช้งาน สามารถใช้แทนปุ่มกดได้
Feature
Low power consumption, can replace the traditional key, 4 x M2 screw holes, easy for operation
Operating voltage: DC 2.5~5.5V; VOH 0.8VCC V; VOL / 0.3VCC / V; Response time: 220mS (at mode of low power consumption), 60mS (quick speed mode)
Control Interface : A total of three pins (GND, VCC, SIG), GND to ground, VCC is the power supply, SIG digital signal output pin;
Power Indicator : Green LED, power on the right that is shiny;
Touch area : Similar to a fingerprint icon inside the area, you can touch the trigger finger.
Positioning holes : 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination;
Spec |
Min |
Typical values |
Max |
Unit |
Power supply voltage VCC |
2.0 |
3 |
5.5 |
V |
Output High V OH |
- |
0.8VCC |
- |
V |
Output Low V OL |
- |
- |
0.3VCC |
V |
Output Pin Sink Current (@ VCC = 3V, V OL = 0.6V) |
- |
8 |
- |
mA |
Output pin pull-up current (@ VCC = 3V, V OH = 2.4V) |
- |
-4 |
- |
mA |
Response time (low power mode) |
- |
- |
220 |
mS |
ตัวอย่าง Sketch ดูที่นี่ครับ
ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB
กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ
ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ
https://www.arduitronics.com/informpayment
หน้าที่เข้าชม | 15,375,197 ครั้ง |
ผู้ชมทั้งหมด | 5,878,275 ครั้ง |
เปิดร้าน | 21 พ.ค. 2556 |
ร้านค้าอัพเดท | 5 ก.ย. 2568 |