M5Stack Core2 ESP32 IoT Development Kit

M5Stack Core2 ESP32 IoT Development Kit
M5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development KitM5Stack Core2 ESP32 IoT Development Kit
รหัสสินค้า BA00169
หมวดหมู่ M5Stack
ราคา 2,485.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
ดูรายละเอียดการเริ่มต้นใช้งานได้ที่ Click
ดาวน์โหลด library และ code ตัวอย่าง การใช้งานได้ที่ Click

Description:
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.

The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board 16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging, downloading of programs and serial communication, a 2.0-inch integrated capacitive touch screen, and a built-in vibration motor.

M5Core2 also features a built-in RTC module which can provide accurate timing. The power supply is managed by an AXP192 power management chip, which can effectively control the power consumption of the base and a built-in green LED power indicator helps to notify the user of battery level. The battery capacity has been upgraded to 390mAh, which can power the core for much longer than the previous model.

The M5Core2 retains the SD card slot and speakers. However, in order to ensure higher quality sound output, the I2S digital audio interface power amplifier chip is used to effectively prevent signal distortion. There are independent power and reset buttons on the left side and bottom of the base.

The 3 icons on the front of the screen are capacitive buttons which are programmable. There is a small expansion board on the back of the base with a 6-axis IMU sensor and microphone.

Power on/off:

  • Power on: click the power button

  • Power off: press the power button for 6s

Restart: Click the RST button at the bottom

To stack M5Core2 with M5 modules, you need to remove/omit the battery bottom of Core2; If you wish to keep I2S Mic, IMU and Battery functions, aM5GO Bottom2is required.

Product Features

  • ESP32-based, built-in Bluetooth,WiFi
  • 16M Flash, 8M PSRAM
  • Built-in speaker, power indicator, vibration motor, RTC, I2S amplifier, capacitive touch screen, power button, reset button
  • TF card slot (16G Maximum size)
  • Built-in lithium battery, equipped with power management chip
  • Independent small board built-in 6-axis IMU, PDM microphone
  • M-Bus Socket & Pins
  • Program Platform: UIFlow, MicroPython, Arduino

Documents and Downloads

Include

Applications

  • Internet of things terminal controller
  • Stem education product
  • DIY creation
  • Smart home equipment

Specification

Resources Parameter
ESP32-D0WDQ6-V3 240MHz dual core, 600DMIPS, 520KB SRAM, WiFi, dual mode Bluetooth
Flash 16MB
PSRAM 8MB
Input Voltage 5V @ 500mA
Interface TypeC x 1, GROVE(I2C+I/0+UART) x 1
IPS LCD Screen 2.0"@320*240 ILI9342C
Touch Screen FT6336U
Speaker 1W-0928
LED Green power indicator light
Button Power button, RST button, Virtual screen button*3
Vibration reminder Vibration motor
MIC SPM1423
I2S Power Amplifier NS4168
6-axis IMU MPU6886
RTC BM8563
PMU AXP192
USB Chip CP2104
DC-DC Boost SY7088
TF card slot 16G Max.
Lithium Battery 390mAh @ 3.7V
Antenna 2.4G 3D antenna
Operating temp. 32°F to 104°F ( 0°C to 40°C )
Net Weight 52g
Gross Weight 70g
Product Size 54 x 54 x 16mm
Package Size 75 x 60 x 20mm
Case Material Plastic ( PC )

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1703]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2143
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,423,354 ครั้ง
ผู้ชมทั้งหมด5,926,432 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท7 ต.ค. 2568

MEMBER

พูดคุย-สอบถาม