Arducam IMX477P V3Link FPD-Link SerDes Camera Kit for NVIDIA® Jetson Orin NX, Orin Nano

Arducam's V3Link Camera Kit is built around a high-quality IMX477P sensor that adheres to the V3Link protocol, making it perfect for high-bandwidth, extended-range projects. The kit utilizes coaxial cables to ensure reliable power and data transmission up to 5 meters, providing low latency for optimal performance. With support for up to 2 IMX477P cameras and channel-switching capabilities, this kit is a versatile solution for various applications.

Designed for the NVIDIA Jetson Orin Nano/NX, the kit includes an IMX477P camera module with a pre-installed Tx board, a Rx adapter board for connecting to the Jetson development board, and a 1-meter coaxial cable, enabling remote camera deployment with minimal configuration.

V3Link, a cutting-edge technology developed by Texas Instruments, incorporates FPD-Link IP to integrate advanced driver assistance systems (ADAS), security cameras, industrial systems, and medical imaging into a single platform. Arducam's V3Link Camera Kit leverages this technology to combine long-range data transfer with embedded vision, offering a compact and efficient solution for a variety of high-performance vision projects.

• Designed for NVIDIA Jetson Orin NX/Nano, ensuring long-range transmission.
• High-performance IMX477P 12.3MP sensor, 24*25mm board, M12 lens, supports up to 5m Fakra Z cable extension.
• Connect up to 2×477P cameras with channel switching support.
• Reduces setup costs with compact hardware and embedded vision system.
• Plug & Play: Hot-swappable Tx board for quick V3LINK camera deployment with simple configuration.

• ADAS
• Automotive
• Security Cameras
• Industrial Systems
• Medical Imaging

• NVIDIA Jetson Orin Nano/NX Compatibility: Designed specifically for the Jetson Orin NX and Orin Nano, this V3LINK camera kit ensures high bandwidth and long-range transmission for optimal performance.
• High-performance IMX477P CMOS: Utilizes a 12.3-megapixel sensor for superior image quality with a 24*25mm camera board and M12 high-quality lens. The compact hardware supports Fakra Z Female to Female RF Coaxial Cable connections of up to 5 meters, enabling multi-camera access.
• Adaptive Channel Management: Up to two 477P cameras of the same model can be connected for independent camera switching. This feature is suitable for applications ranging from automotive to medical imaging.
• Cost-effective Dual-channel System: The dual-channel vision system reduces development costs thanks to its compact hardware architecture. It provides an efficient solution for integrating embedded cameras with V3LINK.
• Plug & Play: Hot-swappable support on the camera side (Tx board) simplifies integration and allows you to quickly deploy your V3LINK Extension camera project with a simple configuration.

• 1 x Arducam V3Link Rx adapter board
• 1 x Arducam V3Link camera Tx board
• 1 x 1m Fakra Z Female to Female RF Coaxial Cable
• 1 x Arducam IMX477P Camera Module
• 1 x 40mm 22-22pin FFC Cable
• 1 x 30cm 22-22pin FFC Cable
• 1 x Screw Pack

• This kit supports only the official NVIDIA Orin NX and Orin Nano development kits; third-party development boards are not supported.

• Quick Start Guide
• V3Link Camera Solution