Raspberry Pi Camera Module 3 - 12MP with Auto Focus NoIR and Wide Lens 120º

• The official Raspberry Pi Camera Module 3
• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
• 2-wire serial control of focus mechanism
• 4 variants to choose from:
  • Camera Module V3, visible light, 75º viewing angle lens
  • Camera Module V3, NoIR, 75º viewing angle lens
  • Camera Module V3, visible light, 120º viewing angle lens
  • Camera Module V3, NoIR, 120º viewing angle lens
• 12-megapixel native resolution sensor-capable of 4608 x 2592 pixel static images
• Supports 1080p50, 720p100 and 480p120 video
• Small and light
• Integral with either IR (infrared) filter or without an IR filter (NoIR) lens
• Integral with either 75º or 120º view angle lens
• 200mm CSI FFC camera cable included
• Size: 25mm x 24mm x 11.5mm (12.4mm for Wide lens variation)
• Weight just over 15g
• Connects to the Raspberry Pi board via the 15-pin FFC ribbon cable
• Camera Module 3 can only work with the latest Picamera2 Python library, please update the Raspberry Pi OS
• Compatible with all Raspberry Pi Computers, except the 1st version of Raspberry Pi Zero which does not comes with CSI socket

Specification:

• Sensor: Sony IMX708
• Resolution: 11.9 megapixels
• Sensor size: 7.4mm sensor diagonal
• Pixel size: 1.4μm × 1.4μm
• Horizontal/vertical: 4608 × 2592 pixels
• Common video modes: 1080p50, 720p100, 480p120
• Output: RAW10
• IR cut filter:
  • Integrated in standard variants
  • Not present in NoIR variants
• Autofocus system: Phase Detection Autofocus
• Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
• Ribbon cable length: 200mm
• Cable connector: 15 × 1mm FPC

The module itself is tiny, at around 25mm x 24mm x 11.5mm (12.4mm height for the Wide lens variants), and weighs just ~15g, making it perfect for mobile or other applications where size and weight are important.

Here is the mechanical drawing of the camera module 3: measurement in mm

The latest Raspberry Pi Camera Module 3 is compatible with:

• Raspberry Pi 5, you will need a smaller pitch-to-pitch CSI cable
• Raspberry Pi 4 Model B 8GB, 4GB, 2GB, 1GB
• Raspberry Pi 3 Model B+
• Raspberry Pi 3 Model B
• Raspberry Pi 3 Model A+
• Raspberry Pi Zero 2 WCH (Wireless with Colored Header), you will need a smaller pitch-to-pitch CSI cable
• Raspberry Pi Zero 2 W, you will need a smaller pitch-to-pitch CSI cable
• Raspberry Pi Zero WH (Wireless and Header), you will need a smaller pitch-to-pitch CSI cable
• Raspberry Pi Zero W (Wireless), you will need a smaller pitch-to-pitch CSI cable
• Raspberry Pi Zero V1.3, you will need a smaller pitch-to-pitch CSI cable