USB to CAN Analyzer Adapter with USB Cable (แท้จาก SeeedStudio)

• High Versatility: Supports CAN2.0A & CAN2.0B and Data can be saved as TXT or Excel
• Excellent Efficiency: Optimize the conversion protocol and customize the receiving ID
• Multiple Working Modes: Standard Mode, Loop Mode, Quiet Mode, Loop Quiet Mode
• Tractability: Data can be refreshed and checked in order
• Easy to Use: connect the CAN-BUS data to your computer via USB

Description

You see there is an on-board green jumper cap in the image below. Adding this jumper will add a 120Ω termination resistor to the circuit. Conversely, when you remove the jumper cap, the resistor will not be added to the circuit. Typically, you will want to keep this jumper cap because the CAN device under test and CAN analyzer are at the end of the CAN network. If you want to learn more, check out 120-ohm terminating resistor page from NI.

Hardware

• Integrated TVS Surge Protection
• Including 120 ohms matched resistance.

Software

Basic Function

• Support CAN2.0A(Standard) and CAN2.0B (Expansion)
• CAN baud rate (5K~1M), customized CAN baud rate.
• CAN send and receive data with time tag, can show the receiving data in order, can refresh data easily.
• Data can be sent by a single frame, multiple frames, manually, regularly, you can even set a certain time to send.

Enhanced Function

• Response to data received from a certain ID.
• Can check CAN Bus status manually.
• Can set to receive from the wanting ID directly, without setting filtering ID or shield ID.
• 4 working mode
• Standard Mode: CAN communication
• Loop Mode: Self-testing, in this mode, the analyzer will send and receive data itself, and also send data to CAN Bus.
• Quiet Mode: Only use to monitor CAN Bus without influence.
• Loop Quiet Mode: Warm testing
• Data can be saved as TXT or Excel.
• Baud rate of virtual COM port can also be modified, default baud rate over 1M, so don’t need to worry about conversion efficiency.

Advanced function

• All customized settings saved automatically.
• Easy secondary development, only need to handle 1 command.
• Transparent Transition function
• Software supports English

Technical details

Part List