Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)

Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)
Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)Particulate Matter Sensor - SPS30 (แถมสาย connector ปลายสายเปิด)
รหัสสินค้า SG10467
หมวดหมู่ วัดสภาพแวดล้อมและแก๊ส Environmental / Gas
ราคา 2,150.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Description:
The Sensirion Particulate Matter Sensor SPS30 is a compact, high quality, optical particle sensor that uses laser scattering and Sensirion's innovative contamination resistance technology to achieve superior binning and particle measurement. This sensor allows users to measure mass concentration and number of particles of 1 µg/m^3, 2.5 µg/m^3, 4 µg/m^3, and 10 µg/m^3.

The compact form factor, measuring just under 41mm x 41mm x 12mm, combined with a sensor lifetime over 8 years and a self cleaning procedure, makes the SPS30 the perfect sensor for projects in difficult to access locations. We've designed and included an easy to use 5-pin cable to make using the SPS30 a snap. The 1.5mm connector is broken out to 5 breadboard friendly wires color coded to make hooking up the SPS30 easy.

The SPS30 has a five pin interface that can communicate over two different protocols: UART and I2C. The SPS30 requires a 5V power supply, but can work with 3.3V and 5V microcontrollers. The logic is 5V and 3.3V tolerant.

Sensirion has written drivers for both the UART protocol and I2C. Unfortunately we've found the I2C is limited to only mass concentrations (not number concentrations) using the Arduino platform. So if you plan to use this sensor with an Arduino, use the UART interface. Both interfaces are described in their datasheet.

Includes:
  • SPS30 Sensor
  • 5-pin 150mm Interface Cable
Documents:

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1702]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2134
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,402,898 ครั้ง
ผู้ชมทั้งหมด5,905,976 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท23 ก.ย. 2568

MEMBER

พูดคุย-สอบถาม