GY-ADS1015 ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module (แถม Pin Header)

GY-ADS1015 ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module (แถม Pin Header)
GY-ADS1015 ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module (แถม Pin Header)GY-ADS1015 ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module (แถม Pin Header)GY-ADS1015 ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module (แถม Pin Header)GY-ADS1015 ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module (แถม Pin Header)
รหัสสินค้า AS30111
หมวดหมู่ ADC / DAC Module
ราคา 225.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module
 
โมดูลแปลงสัญญาณ Analog ให้เป็น Digital  จำนวน 4 ช่อง ความละเอียด 12 บิต อ่านค่าได้ระหว่าง 0 - 4096 เชื่อมต่อแบบอินเตอร์เฟส I2C ใช้ไฟเลี้ยง 2.0-5.5V 
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter.
 
The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs.
 
To get you started, we have example code for both the Raspberry Pi (in our Adafruit Pi Python library) and Arduino (in our ADS1X15 Arduino library repository) Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data.
 
TECHNICAL DETAILS
 
WIDE SUPPLY RANGE: 2.0V to 5.5V
LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
PROGRAMMABLE DATA RATE: 128SPS to 3.3kSPS
INTERNAL LOW-DRIFT VOLTAGE REFERENCE
INTERNAL OSCILLATOR
INTERNAL PGA
I2C INTERFACE: Pin-Selectable Addresses
FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
PROGRAMMABLE COMPARATOR
This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers.
ข้อมูลเพิ่มเติม ADS1015 I2C ADC 4 Channel 12-Bit with Programmable Gain Amplifier Module
 


วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1711]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2157
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,447,453 ครั้ง
ผู้ชมทั้งหมด5,950,531 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท24 ต.ค. 2568

MEMBER

พูดคุย-สอบถาม