Dimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8A

Dimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8A
Dimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8ADimmer Module PWM Control โมดูลขับมอเตอร์/หรี่ไฟ Arduino 220VAC 8A
รหัสสินค้า AG00581
หมวดหมู่ เรกูเลเตอร์ Step-Down
ราคา 245.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
โมดูลหรี่ไฟ 220VAC สามารถใช้งานได้กับอุปกรณ์ที่เป็นขดลวด เช่น เตารีด หลอดไฟแบบใส้ มอเตอร์ ฮีตเตอร์ รองรับอุปกรณ์ที่ใช้ไฟฟ้ากระแสสลับแรงดัน 100V ถึง 250V รองรับกระแสไฟฟ้าสูงสุด 8A 1200W(600W) 





The AC Dimmer is designed to control the alternating current voltage, which can transfer current up to 220V (5A~8A) (TRIAC BTA12 for 600V/8A but we don't recommend up power to this level). In most cases, Dimmer is used to turning power ON/OFF for lamps or heating elements, it can also be used in fans, pumps, air cleaners, e.t.c.

Lately, Dimmer has become an often used decision for the smart home systems. For example, when you need to smoothly change the light brightness. The lamp is slowly turning ON or OFF, creating a comfortable atmosphere. Dimmer works most effective with filament lamps. It’s less stable with low brightness LED lamps, but with moderate and high brightness it will perform a solid job. Note that luminescent lamps (gas discharge lamps) do not support dimming.

Power part of dimmer is isolated from the control part, to exclude the possibility of high current disruption to a microcontroller. The logical level is tolerant to 5V and 3.3V, therefore it can be connected to the microcontroller with 5V and 3.3V level logic.

In Arduino, the dimmer is controlled with RBDdimmer.h library, which uses external interrupts and process time interrupts. It simplifies the code writing and gives more processing time for main code. Which is why you can control multiple Dimmers from one microcontroller.
You can download RBDDimmer.h library and a few examples in «Documents» or on GitHub. We are constantly updating our library, so we recommend to check for the website updates or subscribe to our newsletter.
Dimmer is connected to Arduino controllers via two digital pins. First (Zero) to control the passing of Phase Null of AC, which is used to initiate the interrupt signal. Second (DIM/PSM) to control (dim) current.

Note that Zero requires connection to designated microcontroller pins (which are different depending on the model of Uno, Nano, Leonardo, Mega), since it tied to microcontroller interrupts.

Theory:

Dimming can be achieved by Pulse Skip Modulation:

  • Method 1 — One or more cycles (sine wave signal) are transferred to the load while following one or several cycles are blocked.
  • Method 2 — Partial transferrence of each sine wave to the load.
  • Method 3 — Generation of modulated full sine signal of different frequency up to few hundred Hertz. This method requires specialized powerful AC generators with different modulation.

Methods 1 and 2 are the easiest to execute with the help of a Dimmer and program code: in both cases, there is a need of circuit that detects the zero crossing and can control a TRIAC.

NOTE:
We do not recommend to use dimmer with LED, luminescent lamp or any other lamp with built-in brightness regulator!

Specification


Power up to 220V (5A~8A)
AC frequency 50/60 Hz
TRIAC BTA12  600B
Isolation Optocoupler (MOC302x)
Logic level 3.3V/5V
Zero point Logic level (use EL814)
Modulation (DIM/PSM) logic level ON/OFF TRIAC
Signal current >10mA
Environment:
  • For indoor and outdoor use
  • Operating temperatures: −20°C to 80°C
  • Operating humidity: Dry environment only
ROHS3 Compliant

วิธีการชำระเงิน

ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีธนาคาร KBANK, SCB, BBL,TMB

กรุณาเก็บหลักฐานการโอนเงินของท่านไว้เพื่อแจ้งการชำระเงินด้วยค่ะ

 

ท่านสามารถแจ้งการชำระเงินผ่านระบบอัตโนมัติได้โดย Click Link ข้างล่างค่ะ

https://www.arduitronics.com/informpayment

 

บมจ. ธนาคารกสิกรไทย สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัล แจ้งวัฒนะ ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 สะสมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเซนทรัล พระราม 3 กระแสรายวัน

เพิ่มเพื่อน

@rfm0967y

ติดต่อสอบถาม

เพิ่มเพื่อน

CATEGORY

Sensors / Modules [1695]

CONTACT US

มือถือ 0887823467 แฟกซ์ 02-0153201

Join เป็นสมาชิกร้านค้า

ร้านArduitronics
ร้านArduitronics
/www.arduitronics.com/
Join เป็นสมาชิกร้าน
2118
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

STATISTICS

หน้าที่เข้าชม15,375,197 ครั้ง
ผู้ชมทั้งหมด5,878,275 ครั้ง
เปิดร้าน21 พ.ค. 2556
ร้านค้าอัพเดท5 ก.ย. 2568

MEMBER

พูดคุย-สอบถาม