micro USB to TTL Serial Converter (ชิบ CP2102) for Arduino Pro mini / Lilypad (แถม pin header)

This miniature, pretty and high quality module is everything you need to convert your USB connection to a serial UART TTL used for many purposes including arduino and many other boards interface.

• CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART)
• Supports baud rates from 300bps ~ 1Mbps
• Connections pins are 3.3V, DTR, RXI, TXO, GND and 5V from USB
• Comes with 500mA fuse to protect you from mistakes! 5V supply @ 500mA & 3.3V supply @ 100mA (on chip regulator)
• Board dimensions less than a square inch, more precisely 16x20mm
• High quality blue PCB and components

Technical details

1. embedded USB transceiver, no external circuit needed
2. containing clock circuit, no external circuit needed
3. contains power-on reset circuit
4. The on-chip voltage regulator supply 3.3V@ 100mA output
5. Meet the USB2.0 specification requirements
6. SUSPEND pins support USB suspend state
7. asynchronous serial data bus compatible with all handshakes and modulation controller interface signals
8. Support data format is 8 data bits, 1 stop bit and the parity bit
9. connotation 512 byte receive buffer and 512 byte transmit buffer
10. Supports hardware or X-ON / X-OFF Handshake
11. FTDI compactible